NETGEAR Nighthawk AX4 User Manual

14.
To specify the destination folder, click the Browse button and select a destination
folder.
15. Click the Install button.
The window displays the progress of the installation and then displays the final
installation page.
16. Click the Finish button.
17.
Unzip the configuration files that you downloaded and copy them to the folder where
the VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Program files\OpenVPN\config\ by default.
18.
For a client device with Windows, modify the VPN interface name to NETGEAR-VPN:
a.
On your computer, go to the Networks page. If you are using Windows 10, select
Control Panel > Network and Sharing Center > Change adapter settings.
b.
In the local area connection list, find the local area connection with the device
name TAP-Windows Adapter.
User Manual125Use VPN to Access Your Network
Nighthawk AX4 4-Stream AX3000 WiFi Router

NETGEAR Nighthawk AX4 Specifications

General

WiFi Performance	AX3000 (600 + 2400 Mbps)
WiFi Range	Medium to large homes
Processor	Dual-core processor
USB Ports	1 x USB 3.0
Number of Antennas	4
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
Ethernet Ports	4 LAN) Gigabit Ethernet ports
Security	WPA3
Memory	256MB RAM and 128MB Flash