NETGEAR Nighthawk AX4 User Manual

5.
In the table, select the radio button for the route.
6. Click the Edit button.
The Static Routes page adjusts.
7.
Edit the route information.
8. Click the Apply button.
Your settings are saved.
Delete a static route
To delete a static route:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5.
In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.
Enable or disable implicit beamforming
Implicit beamforming means that the router can use information from WiFi clients that
support beamforming to improve the WiFi signal.
To enable or disable implicit beamforming:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
User Manual78Manage Network Settings
Nighthawk AX4 4-Stream AX3000 WiFi Router

NETGEAR Nighthawk AX4 Specifications

General

WiFi Performance	AX3000 (600 + 2400 Mbps)
WiFi Range	Medium to large homes
Processor	Dual-core processor
USB Ports	1 x USB 3.0
Number of Antennas	4
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
Ethernet Ports	4 LAN) Gigabit Ethernet ports
Security	WPA3
Memory	256MB RAM and 128MB Flash