NETGEAR Nighthawk AX4 User Manual

established, you cannot access your home router or your home network with the
OpenVPN software.
The default LAN IP address scheme for the router is 192.x.x.x. The most common IP
schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x. If you experience a conflict, change the
IP scheme either for your home network or for the network with the client VPN computer.
For information about changing these settings, see Change the LAN TCP/IP settings on
page 53.
To open a VPN tunnel:
1. Launch the OpenVPN application with administrator privileges.
The OpenVPN icon displays in the Windows taskbar.
Tip: You can create a shortcut to the VPN program, then use the shortcut to access
the settings and select the run as administrator check box.Then every time you use
this shortcut, OpenVPN automatically runs with administrator privileges.
2. Right-click the OpenVPN icon.
3. Select Connect.
The VPN connection is established. You can launch a web browser and log in to your
router.
User Manual129Use VPN to Access Your Network
Nighthawk AX4 4-Stream AX3000 WiFi Router

NETGEAR Nighthawk AX4 Specifications

General

WiFi Performance	AX3000 (600 + 2400 Mbps)
WiFi Range	Medium to large homes
Processor	Dual-core processor
USB Ports	1 x USB 3.0
Number of Antennas	4
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
Ethernet Ports	4 LAN) Gigabit Ethernet ports
Security	WPA3
Memory	256MB RAM and 128MB Flash