NETGEAR Nighthawk AX4 User Manual

Table 4. Router specifications (Continued)
DescriptionFeature
Compatible with 10BASE-T, 100BASE-TX, 1000BASE-T, or RJ-45WAN
Maximum WiFi signal rate complies with the IEEE
®
802.11 standard.
2
•
2.4GHz AX: 2x2 (Tx/Rx) 1024/256 QAM
40/20MHz, up to 600Mbps
•
5GHz AX: 2x2 (Tx/Rx) 1024 QAM
160/80/40/20Mbps, up to 2400Mbps
•
Backwards compatible with 802.11a/b/g/n/ac WiFi
WiFi
Auto Rate SensingRadio data rates
IEEE 802.11ax 2.4GHz 1024 QAM support
IEEE 802.11ax 5.0GHz 160MHz 1024 QAM support
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node (typically
50–70 nodes).
Maximum computers per
wireless network
WPA2-Personal [AES]
WPA-Personal [TKIP] + WPA2-Persoanl [AES]
WPA3-Personal [SAE]
802.11 security
2
Maximum wireless signal rate derived from IEEE 802.11 specifications. Actual data throughput and wireless coverage
will vary and may be lowered by network and environmental conditions, including network traffic volume and building
construction. NETGEAR makes no representations or warranties about this product’s compatibility with AX standards.
User Manual156Supplemental information
Nighthawk AX4 4-Stream AX3000 WiFi Router

NETGEAR Nighthawk AX4 Specifications

General

WiFi Performance	AX3000 (600 + 2400 Mbps)
WiFi Range	Medium to large homes
Processor	Dual-core processor
USB Ports	1 x USB 3.0
Number of Antennas	4
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
Ethernet Ports	4 LAN) Gigabit Ethernet ports
Security	WPA3
Memory	256MB RAM and 128MB Flash