NETGEAR Nighthawk X10 R9000 - Join the WiFi Network Using the Routers WiFi Settings; To select your network and enter its password:

4
Join the WiFi Network Using the Router’s WiFi
Settings
Use the router’s WiFi network name and password to connect your
WiFi-enabled computer or mobile device to the router’s network
through WiFi. If you did not change the router’s WiFi network name
and password, use the router’s preassigned WiFi network name and
password, which are on the router’s label.
¾ To select your network and enter its password:
1. On your WiFi-enabled computer or mobile device, open the WiFi
connection manager that manages your WiFi connections.
The WiFi connection manager scans for WiFi networks in your area.
2. Find and select your router’s WiFi network name (SSID).
The SSID is on the router’s label.
3. Enter the router’s password (or your custom password if you
changed it) to connect.
The password is on the router’s label.
4. Repeat Step 1 through Step 3 to connect other WiFi-enabled
computers or mobile devices.