EasyManua.ls Logo

NETGEAR Nighthawk X10 R9000 - Access a USB Device on the Network; To access the USB storage device from a Windows computer:

NETGEAR Nighthawk X10 R9000
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
A page displays your recovered password.
7. Click the Login again button.
A login window opens.
8. With your recovered password, log in to the router.
Access a USB Device on the Network
ReadySHARE lets you access and share a USB storage device connected
to the routers USB ports. (If your USB device uses special drivers, it is
not compatible.)
¾ To access the USB storage device from a Windows
computer:
1. Connect your USB storage device to a USB port on the router.
It might take up to two minutes before the USB storage device is
ready for sharing.
2. On a Windows computer that is connected to the network, select
Start > Run, enter \\readyshare in the dialog box, and click the
OK button.
A window displays the files and folders on the device.

Related product manuals