NETGEAR Nighthawk X6 R8000 User Manual

Manage Your Network
130
Nighthawk X6 AC3200 Tri-Band WiFi Router
Delete a Static Route
 To delete a static route:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Custom Static Routes screen displays.
5. In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.
View Devices Currently on the Network
You can view all computers or devices that are currently connected to your network.
 To view devices on the network:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.

NETGEAR Nighthawk X6 R8000 Specifications

General

WiFi Speed	AC3200 (600 + 1300 + 1300 Mbps)
Memory	128 MB Flash and 256 MB RAM
Beamforming	Yes
Dynamic QoS	Yes
Smart Connect	Yes
VPN Support	Yes
Guest Network Access	Yes
Parental Controls	Yes
WiFi Technology	802.11ac
Processor	Dual Core 1GHz
Antennas	6 external antennas
Ports	1 USB 3.0, 1 USB 2.0