NETGEAR Orbi AC3000 - View or Change Advanced Wifi Settings

Specify Network Settings
71
Orbi High-Performance AC3000 Tri-band WiFi System
View or Change Advanced WiFi Settings
 To view or change advanced WiFi settings:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
Note: The backhaul password is a security key that is used in WiFi
communication between the router and the satellite. For information
about generating a new backhaul password, see
Generate a New
Backhaul Password
on page 73.
5. In the Region list, select your region.
In some locations, you cannot change this setting.
6. T
o control the SSID broadcast, select or clear the Enable SSID Broadcast check box.
When this check box is selected, the router broadcasts its network name (SSID) so that it
displays when you scan for local WiFi networks on your computer or WiFi device.
7. Click the Apply button.
Your settings are saved.