Reset to Factory Settings
You can return the modem router and satellite to its factory settings. Use the end of a
paper clip or a similar object to press and hold the Reset button on the back of the
modem router or satellite for at least seven seconds. The modem router or satellite
resets, and returns to the factory settings.
Factory Settings for Orbi Modem Router NBR750
The following table shows the factory default settings for the modem router.
Table 4. Factory default settings for the modem router
Default SettingFeature
orbilogin.comUser login URLRouter
login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Always use Mobile NetworkInternet connection modeMobile
boadband
Internet
connection
AutomaticNetwork mode
PDP-IP(IPv4)PDP
NoneAuthentication
DisabledRoaming
Use default hardware addressWAN MAC addressWired
Internet
connection
1500WAN MTU size
AutoSensingPort speed
User Manual118Supplemental Information
Orbi 5G WiFi 6 Mesh System
To Next Page
Loading...
