NETGEAR Orbi Pro SRR60 User Manual

Select one of the following:
•
To allow access from a single IP address on the Internet, select the Only This
Computer radio button. Enter the IP address to be allowed access.
•
To allow access from a range of IP addresses on the Internet, select the IP Address
Range radio button. Enter a beginning and ending IP address to define the
allowed range.
•
To allow access from any IP address on the Internet, select the Everyone radio
button.
7.
Specify the port number for accessing the router.
The default port for secure HTTP (HTTPS) access is 8443. You can enter a custom
port number for the remote router access. Choose a number from 1024 to 65535,
but do not use the number of any common service port.
8. Click the Apply button.
Your settings are saved.
Use remote access
To use remote access:
1. Launch a web browser on a computer that is not on your business network.
2.
Type your router’s WAN IP address into your browser’s address or location field
followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number
8080, enter https://134.177.0.123:8080 in your browser.
User Manual140Manage and Monitor Your Orbi
Pro System
Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60

NETGEAR Orbi Pro SRR60 Specifications

General

Cables included	LAN (RJ-45)
AC adapter included	Yes
Antennas quantity	6
DSL WAN	No
WAN connection type	RJ-45
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	3000 Mbit/s
WLAN data transfer rate (first band)	400 Mbit/s
WLAN data transfer rate (third band)	1733 Mbit/s
WLAN data transfer rate (second band)	866 Mbit/s
Product type	Tabletop router
Product color	White
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
Power source type	DC