NETGEAR Orbi Wi-Fi 6 User Manual

Welcome to your new
Orbi Wi-Fi 6 router
What’s in the box?
1x NETGEAR Orbi Wi-Fi 6 router 1x Power adapter 1x Ethernet cable
1
Download the
Orbi app
2
Connect your
Orbi router
1. Connect the Ethernet cable to your Orbi’s Internet port, then connect
the other end to the port labelled LAN1 or GE1 on your Optical Network
Terminal – that’s the fibre box usually found on your wall.
2. Connect the power adapter and turn your Orbi on at the wall.
Got extra Orbi satellites? Find a place to plug them in now, or you can set
them up later. Orbi satellites must be within range of your Orbi router’s Wi-Fi
signal, so don’t place them too far apart from each other.
If you have a landline, connect it to the port labelled POTS or TEL on your
Optical Network Terminal.
LAN TEL
ONT

NETGEAR Orbi Wi-Fi 6 Specifications

General

Wi-Fi Technology	Wi-Fi 6 (802.11ax)
Coverage	Up to 5, 000 sq. ft.
Speed	Up to 6Gbps
Tri-band	Yes
Smart Parental Controls	Yes
Voice Control	Amazon Alexa, Google Assistant
MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
Guest Network	Yes
Security	WPA3
App Control	Orbi app
Ethernet Ports	4 Gigabit Ethernet ports (per router/satellite)
Weight	2.86 lbs (per unit)

Summary

What's in the box

Download the Orbi app

Connect your Orbi router

Connect to network

Connect the Ethernet cable to the Orbi's Internet port and the Optical Network Terminal.

Power on router

Connect the power adapter and turn the Orbi router on.

Connect to your Orbi Wi-Fi network

Connect mobile device

Connect your mobile device to the Orbi Wi-Fi network using the printed credentials.

Open the Orbi app

Follow setup instructions

Open the Orbi app and follow the on-screen setup instructions, skipping modem reconnection steps.