Your settings are saved.
Enable or disable implicit beamforming
Implicit beamforming allows the router to use information from WiFi clients that support
beamforming to improve the WiFi signal.
To enable or disable implicit beamforming:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5.
To enable or disable implicit beamforming, do one of the following:
•
To enable implicit beamforming, select the Enable Implicit Beamforming check
box.
•
To disable implicit beamforming, clear the Enable Implicit Beamforming check
box.
6. Click the Apply button.
Your settings are saved.
Enable or disable MU-MIMO
Multiuser multiple input, multiple output (MU-MIMO) improves performance when
multiple MU-MIMO-capable WiFi clients transfer data at the same time. WiFi clients
must support MU-MIMO, and they must be connected to a 5 GHz WiFi band.
User Manual60Optimize Performance
Orbi WiFi System
To Next Page
Loading...
Need help?
General
