NETGEAR Orbi RBR860 - Enable or Disable the Iot Network; Change the Wifi Radio Band for the Iot Network

Enable or disable the IoT network
To enable or disable the IoT network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.net.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the Wireless IoT Settings section, select or clear the Enable IoT Network check
box.
Selecting the check box enables the IoT network. Clearing this check box disables
the IoT network.
6. Click the Apply button.
Your settings are saved.
Change the WiFi radio band for the IoT network
To change the WiFi radio band fort the IoT network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
User Manual58Specify WiFi Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System