To enable or disable WMM QoS:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > Wireless Settings.
The Advanced Wireless Settings page displays.
5.
In the Advanced Wireless Settings (2.4GHz b/g/n/ax), do one of the following:
•
To enable WMM for the 2.4 GHz radio, select the Enable WMM (Wi-Fi
multimedia) settings (2.4GHz b/g/n/ax) check box. (This is the default selection.)
•
To disable WMM for the 2.4 GHz radio, clear the Enable WMM (Wi-Fi
multimedia) settings (2.4GHz b/g/n/ax) check box.
6.
In the Advanced Wireless Settings (5GHz 802.11a/n/ac/ax) section, do one of the
following:
•
To enable WMM for the 5 GHz radio, select the Enable WMM (Wi-Fi multimedia)
settings (5GHz a/n/ac/ax) check box. (This is the default selection.)
•
To disable WMM for the 5 GHz radio, clear the Enable WMM (Wi-Fi multimedia)
settings (5GHz a/n/ac/ax) check box.
7. Click the Apply button.
Your settings are saved.
Change the CTS/RTS threshold and
preamble mode for a radio
For most WiFi networks, the CTS/RTS threshold and preamble mode work fine and we
recommend that you do not change the settings. (In general, these settings are intended
for WiFi testing.)
User Manual79Specify Network Settings
Orbi Quad-Band Mesh WiFi 6E System
To Next Page
Loading...
Need help?
General
