NETGEAR ProSafe Plus XS708E - User Manual

8T
10G
1G
8F
ProSafe Plus
Step 2. Connect power
Step 1. Connect equipment
XS708E
Computer Server
On
Off
Power LED
Installation Guide
Activity (blinking)
No link (off)
10 Gbps link
Left port LEDs
Right port LEDs
Fan LED
Fan failure (on)
Fan normal (off)
Activity (blinking)
No link (off)
1 Gbps/100 Mbps link
8T
10G
1G
8F
Step 3. Check status
10GBASE-T Switch
8-Port 10Gbps XS708E
XS708E IG 28Nov2012.fm Page 1 Wednesday, November 28, 2012 6:51 PM

NETGEAR ProSafe Plus XS708E Specifications

General

Ports	8 x 10GBase-T
Switching Capacity	160 Gbps
Forwarding Rate	119.04 Mpps
MAC Address Table Size	16K entries
Jumbo Frame Support	Up to 9216 bytes
Power Supply	Internal
Weight	3.5 lbs
Device Type	Switch
Type	Switch
Form Factor	Desktop
Subtype	10 Gigabit Ethernet
Features	VLAN, QoS, IGMP Snooping
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Power	100-240 VAC, 50/60 Hz
Dimensions	11.6 x 6.5 x 1.7 in
Dimensions (W x D x H)	440 mm x 250 mm x 44 mm
Operating Temperature	32 °F - 104 °F
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	90% (non-condensing)

Summary

Initial Connection and Status Check

Connect Equipment

Procedure for connecting computer and server to the switch.

Connect Power

Procedure for connecting the power adapter to the switch.

Check Device Status Indicators

Details on Power LED, Port LEDs, and Fan LED status.

Switch Configuration Utility Setup

Install Configuration Utility

Steps to install the ProSafe Plus Utility from the resource CD.

Configure the Switch

Instructions on using the utility to select and configure the switch.

Technical Specifications

Technical Support Information