13
4. Launch ReadySHARE Vault.
5. Click the Dashboard or the Backup tab to set up and run your
backup.
ReadySHARE Printer
To set up ReadySHARE Printer:
1. Connect the USB printer to the router USB port with a USB
printer cable.
2. Install the printer driver software (available from the printer
manufacturer) on each computer that will share the printer.
3. Visit www.netgear.com/readyshare and download and install the
NETGEAR USB Control Center utility on each computer that will
share the printer.
4. For ReadySHARE Printer setup, follow the Easy to Set-Up
Instructions available online just above the download links.
To Next Page
Loading...
