18
Iperf Upload Test
1. On the PC connected to the router via Ethernet, run IPerf as a server.
Type: IPerf.exe –s –w 10000k
(Run as server mode and 10000k byte file size.)
2. On the computer with the wireless adapter, run IPerf as a client.
Type: IPerf.exe –c srv_ipaddress –w 10000k –P 2 –t 60
(Run as client mode, and set up the server IP with 10000k file size transfer with two pairs on 60
seconds) where srv_ipaddress is the IPerf server IP address.)
Iperf Bidirectional Test
1. Set up the Iperf Download Test and the Iperf Upload Test.
2. When both scripts are set up, run them together at the same time.
The total throughput is added on two screens.
WAN-LAN speed Test
1. Download speed test: Set up IxChariot with endpoint 1 as LAN IP address, endpoint 2 as WAN IP
address. Select “Filercvl.scr” script (a file receive script) and edit the file size from 100,000 Bytes
to 1,000,000 Bytes. Set up and run the test for 1 minute and collect the data.
2. Upload sped test: Set up with IxChariot with endpoint 1 as LAN IP address, endpoint 2 as WAN IP
address. Select “Filesendl.scr” script (a file send script) and edit the file size from 100,000 Bytes
to 1,000,000 Bytes. Setup and run the test for 1 minute and collect the data.
3. Bi-Direction speed test: Set up IxChartio with endpoint 1 as LAN IP address, endpoint 2 as WAN
IP address. Select “Filesendl.scr” script (a file send script) and edit the file size from 100,000
Bytes to 1,000,000 Bytes. Set up another endpoint 1 as LAN IP address, endpoint 2 as WAN IP
address. Select “Filercvl.scr” script (a file receive script) and edit the file size from 100,000 Bytes
to 1,000,000 Bytes. Run these two pairs of tests for 1 minute and collect the data.
To Next Page
Loading...
Need help?
Ports & interfaces
System Memory
Weight and Dimensions
