NETGEAR R6300 Installation Guide

13
Step 7: Click the Disconnect button at any time to release the
connection. The status then changes to Available.
Once the Connect button has been clicked once on all computers in
the network, the utility on each of them automatically handles the
printing queue and handling. The status of the printer should appear
as Available on all of the computers.
NOTE:
• When the status is Available, you can use the USB printer.
• When the status is Manually connected by xxx, only the xxx
computer can use the printer. Other network devices must wait
until the xxx computer has released the connection, or until the
connection times out (the default time-out value is 30 seconds).
• You can set the value for the default time-out time from the Tools
> Configuration screen.

NETGEAR R6300 Specifications

Ports & interfaces

USB ports	2 USB 2.0 ports
Ethernet ports	5 Gigabit Ethernet ports
WAN ports	1 WAN port

System Memory

flash memory	128 MB
RAM	128 MB
memory type	flash and RAM

Weight and Dimensions

dimensions	205 x 255 x 77 mm
weight	654 g