NETGEAR R6300 Installation Guide

3
3. Power on the router.
a. Connect the power adapter to the router and plug the power
adapter into an outlet.
b. Before going to Step 4, wait for the wireless LED on the front
panel of the router to turn on. If none of the LEDs on the
front panel are on, press the Power On/Off button on the
rear panel of the router.
4. Connect a computer.
You can use an Ethernet cable (not included) or connect
wirelessly.
• Use the Ethernet cable to connect your computer to an
Ethernet port on your router.
• Or, connect wirelessly by using the preset wireless security
settings located on the label on the bottom of the router.
3
a
b
On/Off
Router
Modem
4
Router
Modem
Computer

NETGEAR R6300 Specifications

Ports & interfaces

USB ports	2 USB 2.0 ports
Ethernet ports	5 Gigabit Ethernet ports
WAN ports	1 WAN port

System Memory

flash memory	128 MB
RAM	128 MB
memory type	flash and RAM

Weight and Dimensions

dimensions	205 x 255 x 77 mm
weight	654 g