NETGEAR R6300v2 Installation Guide

9
Access the Router to Make More
Changes
After you use NETGEAR genie to set up the router, you can log in to
the router to view or change its settings.
 To log in to the router:
1. Launch a web browser from a computer or wireless device that
is connected to the router.
2. Type www.routerlogin.net or www.routerlogin.com in the
address field of the browser.
A login screen displays.
3. Enter admin for the user name and password for the password.
The Basic Home screen displays.
 To change the password for the router user name:
1. Log in to the router.
2. On the ADVANCED tab, select Administration > Set Password.
3. Type your old password, and type the new password twice.
4. Select the Enable Password Recovery check box.
5. Click Apply.
6. When prompted, answer questions.
The answers are saved.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)