Need help?Do you have a question about the NETGEAR R6300v2 and is the answer not in the manual?
General| WiFi Technology | 802.11ac Dual Band Gigabit |
|---|---|
| WiFi Range | Medium to large homes |
| USB Ports | 1 x USB 3.0, 1 x USB 2.0 |
| Wireless Standard | 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz and 5 GHz |
| Processor | 800 MHz |
| Ethernet Ports | 4 x Gigabit LAN, 1 x Gigabit WAN |
| Antenna | 3 external antennas |
| Security | WPA/WPA2-PSK |
| Ports | 1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0 |
| Memory | 256 MB RAM, 128 MB Flash |
| WiFi Speed | Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz) |
Pre-setup checklist including ISP info and network settings.
Explains different login types (router vs. ISP) and credentials.
Step-by-step guide to using the NETGEAR genie for initial router setup.
Instructions on how to update the router's firmware for new features/security.
Configuration of the router's connection to the Internet and ISP settings.
Configuration of Wi-Fi network name (SSID) and security settings.
Steps to install and configure the printer sharing utility.
Allowing external devices to initiate connections to internal servers.
Procedure to update the router's operating software for improvements.
Securing the router by changing the default administrator password.
Steps to resolve issues preventing access to the router's interface.
Troubleshooting steps for when the router has no internet connectivity.
To Next Page
