NETGEAR R6300v2 User Manual

Administration
88
R6300v2 Smart WiFi Router
View Router Status
 To view router status and usage information:
Select ADV
ANCED Home or select Administration > Router Status.
Router Information
Hardware Version. The router model.
Firmware Version.
The version of the router firmware. It changes if you upgrade the router
firmware.
GUI Language Version. The localized language of the user interface.
LAN Port.
• MAC Address.
The Media Access Control address. This is the unique physical address
used by the Ethernet (LAN) port of the router.
• IP Address.
The IP address used by the Ethernet (LAN) port of the router. The default is
192.168.1.1.
• DHCP. Identifies whether the router’
s built-in DHCP server is active for devices on the
LAN.
• Reboot.
You can click this button to reboot the router.
Internet Port
MAC Address. The Media Access Control address, which is the unique physical address
used by the Internet (WAN) port of the router.
IP Address. The IP address used by the Internet (WAN) port of the router. If no address is
shown or the address is 0.0.0, the router cannot connect to the Internet.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)