NETGEAR R6300v2 User Manual

NETGEAR genie Basic Settings
20
R6300v2 Smart WiFi Router
Internet Setup
The Internet Setup screen is where you view or change basic ISP information.
Note: You can use the Setup Wizard to detect the Internet connection and
automatically set up the router. See Internet Connection Setup Wizard
on page 31.
 To view or change the basic Internet setup:
1. From the Home screen, select Internet.
Scroll to
view more
settings
The fields that display in the Internet Setup screen depend on whether your Internet
connection requires a login.
2. Select the Yes or No radio button.
• Ye
s. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
• No. Enter the account and domain names, only if needed.
3. Enter the settings for the IP address and DNS server
.
The default settings usually work fine. If you have problems with your connection, check
the ISP settings.
4. Click the Apply button.
Your settings are saved.
5. Click T
est to test your Internet connection.
If the NETGEAR website does not display within 1 minute, see Chapter 10,
Troubleshooting.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)