NETGEAR R6300v2 User Manual

NETGEAR genie ADVANCED Home
44
R6300v2 Smart WiFi Router
Bandwidth Control
Bandwidth control lets you set a limit to the bandwidth that is available for traffic from the
router to the Internet.
 To set the maximum uplink bandwidth:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Enter www
.routerlogin.net or www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Setup > QoS Setup.
The QoS Setup screen displays:
5. Select the Turn Internet Access QoS On check box.
6. Specify the maximum uplink bandwidth for your Internet connection:
• If you know what your uplink bandwidth is, type it in the Uplink bandwidth Maximum
field and select either Kbps or Mbps from the drop-down list.
• If you are not sure, click the Speed T
est button.
Speedtest verifies the upstream speed of your Internet connection. The Uplink
bandwidth Maximum field displays the result of the test.
7. Click the Apply button.
Your changes are saved.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)