NETGEAR R6300v2 User Manual

48
5
5. USB Storage
Accessing and Configuring a USB Storage
Device
This chapter describes how to access and configure a USB storage drive attached to your
router. The USB port on the router can be used only to connect USB storage devices like flash
drives or hard drives, or a printer. Do not connect computers, USB modems, CD drives, or DVD
drives to the router USB port.
This chapter contains the following sections:
• USB Drive Requirements
• Connect a USB Storage Device to the Router
• Safely Remove a USB Drive
• Access the USB Storage Device
• Share Files
• Back Up Windows Computers with ReadySHARE Vault
• View a USB Device Attached to the Router
• USB Storage Device Network and Access Settings
• Available Network Folders
• Specify Approved USB Devices
• Media Server Settings
• TiVo Support
For information about using the ReadySHARE Printer feature, see Chapter 6, ReadySHARE
Printer.
For more about ReadySHARE features, visit www.netgear.com/readyshare.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)