NETGEAR R6300v2 User Manual

ReadySHARE Printer
64
R6300v2 Smart WiFi Router
Note: Some USB printers (for example, HP and Lexmark printers) request
that you do not connect the USB cable until the installation software
prompts you.
2. On each computer on your network that shares the USB printer
, install the driver software for
the USB printer.
If you do not have the printer driver, contact the printer manufacturer to find and download
the most recent printer driver software.
3. Download the ReadySHARE Printer utility setup file and instructions from
www.netgear.com/readyshare
4. On each computer on your network that shares the USB printer, install the ReadySHARE
Printer utility.
Once installed, the ReadySHARE Printer utility displays on your computer as the
NETGEAR USB Control Center
.
Install the NETGEAR USB Control Center
For the ReadySHARE Print feature to work, this utility has to be installed and running in the
background on each computer in the network from which you want to control this USB printer.
Once installed, the ReadySHARE Printer utility displays on your computers as the NETGEAR
USB Control Center.
 To install the NETGEAR USB Control Center:
1. On each computer on your network that shares the USB printer
, double-click the
ReadySHARE Printer utility setup file that you downloaded.
The ReadySHARE Printer utility setup file and instructions can be downloaded through
this URL: www.netgear.com/readyshare

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)