NETGEAR R6300v2 User Manual

ReadySHARE Printer
65
R6300v2 Smart WiFi Router
2. Follow the instructions to install the NETGEAR USB Control Center utility.
3. Select the language and click OK.
The utility is installed
4. On each computer on your network that shares the USB printer
, perform the initial setup of
the NETGEAR USB Control Center.
The first time you use the USB printer that is connected to your router, you are asked to
select the USB printer
. For more information, see Initial Setup of the NETGEAR USB
Control Center on page 75.
5. (Optional) Change the default settings.
For more information, see Configure the NETGEAR USB Control Center on page 77.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)