NETGEAR R6300v2 User Manual

Advanced Settings
108
R6300v2 Smart WiFi Router
The Static Routes screen adjusts.
a. Edit the route information.
b. Click the Apply button.
• Click the Delete button.
The route is removed from the table.
Remote Management
The remote management feature lets you access your router over the Internet to view or
change its settings.
Note: Be sure to change the router default login password to a secure
password. The ideal password contains no dictionary words from any
language and contains uppercase and lowercase letters, numbers,
and symbols. It can be up to 30 characters. See Change the
Password on page 93.
 To set up remote management:
1. Select ADV
ANCED > Advanced Setup > Remote Management.
2. Select the Turn Remote Management On check box.
3. Specify the external IP addresses from which you want to allow access the router’
s remote
management.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
Under Allow Remote Access By, select one of the following:

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)