Need help?Do you have a question about the NETGEAR R6700v3 and is the answer not in the manual?
General| Model | R6700v3 |
|---|---|
| Category | Wireless Router |
| Wireless Standard | 802.11ac |
| Bands | Dual Band |
| WiFi Performance | AC1750 (450 + 1300 Mbps) |
| WiFi Range | Up to 1500 sq ft |
| USB Ports | 1 x USB 3.0 |
| Antenna | 3 external antennas |
| Beamforming | Yes |
| Memory | 256 MB RAM, 128 MB Flash |
| Security | WPA2 |
| Dimensions | 11.22 x 7.26 x 1.97 in |
| Ethernet Ports | 4 x Gigabit LAN, 1 x Gigabit WAN |
| Processor | Dual-Core Processor |
Details on unboxing the router and its package contents for initial setup.
Explains the function and status indicators of the router's top panel LEDs and buttons.
Identifies and describes the ports and buttons located on the rear panel of the router.
Describes the information found on the router's label, such as login credentials and MAC address.
Provides recommendations for positioning the router to optimize WiFi signal range and performance.
Instructions on how to connect the router to the modem and power source to establish connectivity.
Describes the process and considerations for mounting the router securely on a wall.
Guides on establishing a wired or WiFi connection to the router for initial access and setup.
Explains the different types of logins required for ISP, WiFi, NETGEAR accounts, and router access.
Details how to use a web browser to access the router's interface for configuration and setup.
Instructions for using the Nighthawk mobile app to easily install and manage the router's settings.
Steps to use the guided wizard for automatically detecting and configuring Internet connection settings.
Manual configuration of various Internet connection types, including PPPoE and PPTP/L2TP.
Guidance on configuring IPv6 connections, including Auto Detect, 6to4 tunnels, pass-through, and fixed settings.
Explains how to adjust the Maximum Transmission Unit (MTU) size for the WAN connection.
How to set up rules to allow or block specific devices from accessing the Internet based on MAC addresses.
Instructions on blocking specific websites or domains by entering keywords or domain names.
Managing Access Control Lists (ACLs) to define allowed or blocked devices for network access.
Setting up schedules to block Internet sites and services during specific times or days.
Options for Wide Area Network (WAN) settings, including DMZ, MTU, NAT, and SIP ALG.
Covers router device name, LAN IP/TCP settings, DHCP server, and reserved IP addresses.
Adjusting basic WiFi settings like SSID, channel, security, and enabling guest networks.
Configuring the router to function as a wireless access point (AP) within the local network.
Procedures for checking and installing new firmware versions to keep the router up-to-date and secure.
How to change the router's administrator password and set up password recovery options for security.
Options for backing up, restoring, or erasing the router's configuration settings for management.
Restoring the router to its original factory default settings using the reset button or erase function.
Lists supported file system types and requirements for USB storage devices to be compatible with the router.
Step-by-step guide on physically connecting a USB storage device to the router's USB port.
How to access connected USB storage devices from Windows or Mac computers on the local network.
Instructions for backing up Windows or Mac computers to USB storage connected to the router.
Configuring Dynamic DNS to use a domain name for accessing the router and its USB devices remotely.
Enabling and configuring FTP access to allow remote download and upload of files from USB storage.
Methods to access USB storage devices remotely using Dynamic DNS or the router's public IP address.
Setting up and using NETGEAR ReadyCLOUD for remote file access to USB storage devices connected to the router.
Configuring the router to act as a DLNA/UPnP AV media server for streaming content to compatible devices.
Setting up the router's iTunes server to play music from USB storage on computers using iTunes or the Remote app.
Configuring the router to allow TiVo devices to access media files stored on a connected USB device.
Steps to install the necessary printer drivers and physically connect a USB printer to the router.
Instructions for downloading and installing the ReadySHARE utility required for printer sharing.
How to use the NETGEAR USB Control Center utility to connect and print documents via the shared USB printer.
Steps to establish a virtual private network (VPN) connection for secure remote access to the router and network.
Guide for installing the OpenVPN client software on Windows, Mac, iOS, and Android devices.
How to open a VPN tunnel from a computer to access the router's USB devices, media, or home Internet service.
Setting up rules to forward specific incoming Internet traffic to local servers or applications on the network.
Configuring port triggering to dynamically open ports for specific applications based on outbound traffic.
Basic troubleshooting steps including restarting the network, checking connections, and verifying settings.
Interpreting the status of router LEDs to diagnose power, Internet, and WiFi connectivity problems.
Solutions for common problems like inability to log in to the router or access the Internet.
Steps to diagnose and resolve issues related to connecting to the router's WiFi network.
Table detailing the default configuration settings for various router features after a factory reset.
Detailed specifications of the router, including protocols, power, dimensions, and operating conditions.
To Next Page
