Remotely access a USB device using
ReadyCLOUD
NETGEAR ReadyCLOUD for routers lets you remotely access files stored on a USB
storage device that is connected to the router. Before you can use ReadyCLOUD, you
must create a ReadyCLOUD account and register your router.
A ReadyCLOUD app is also available for Windows computers, Android mobile devices,
and iOS mobile devices. For more information about setting up ReadyCLOUD, see the
ReadyCLOUD for Routers User Manual, which is available online at
downloadcenter.netgear.com.
Create a ReadyCLOUD account
To create a ReadyCLOUD account:
1.
Launch a web browser from a computer or mobile device.
2. Visit readycloud.netgear.com.
The ReadyCLOUD Welcome page displays.
3. Click the Sign In link.
The Sign In page displays.
4. Click the Create Account link.
The Create a MyNETGEAR account page displays.
5.
Complete the fields to set up your account, and click the Create button.
You are now ready to register your router with your ReadyCLOUD account.
Register your router with ReadyCLOUD
After you create a ReadyCLOUD account, you must register your router with your
ReadyCLOUD account.
To register your router with your ReadyCLOUD account:
1. Connect a USB storage device to a USB port on the router.
2.
If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the
router.
User Manual122Use Dynamic DNS to Access USB
Storage Devices Through the
Internet
Nighthawk AC1750 Smart WiFi Router
To Next Page
Loading...
Need help?
General
