NETGEAR R6700v3 User Manual

5
Network Settings
The router comes ready for WiFi, Ethernet, and USB connections. You can customize
the router’s network settings. We recommend that you install the router and connect it
to the Internet before you change its network settings.
This chapter includes the following sections:
• View or change the WAN settings
• Set up a default DMZ server
• Change the Router’s Device Name
• Change the LAN TCP/IP settings
• Specify the IP addresses that the router assigns
• Disable the DHCP server feature in the router
• Manage reserved LAN IP addresses
• Use the WPS Wizard for WiFi connections
• Specify Basic WiFi Settings
• Change the WiFi Mbps Settings
• Change the WiFi Password or the WiFi Security
• Set up a guest WiFi network
• Control the WiFi radios
• Set up a WiFi schedule
• Specify WPS settings
• Set up the router as a WiFi access point
• Set Up a Bridge for a Port Group or VLAN Tag Group
• Manage custom static routes
• Improve network connections with Universal Plug and Play
53

NETGEAR R6700v3 Specifications

General

Model	R6700v3
Category	Wireless Router
Wireless Standard	802.11ac
Bands	Dual Band
WiFi Performance	AC1750 (450 + 1300 Mbps)
WiFi Range	Up to 1500 sq ft
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Beamforming	Yes
Memory	256 MB RAM, 128 MB Flash
Security	WPA2
Dimensions	11.22 x 7.26 x 1.97 in
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Processor	Dual-Core Processor