NETGEAR R6300v2 User Manual

NETGEAR genie ADVANCED Home
45
R6300v2 Smart WiFi Router
Enable Facebook WiFi
If you have a small business, you can set up Facebook WiFi on your router so that customers
can access your business WiFi by checking in to your Facebook business page. Before you
enable Facebook WiFi, you must set up a guest network. For more information, see Set Up a
Guest Network on page 27.
 To enable Facebook WiFi:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Enter www
.routerlogin.net or www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Set up a guest network.
For more information, see Set Up a Guest Network on page 27.
5. Select ADV
ANCED > Advanced Setup > Facebook Wi-Fi.
The Facebook Wi-Fi screen displays:
6. Select the Enable Facebook Wi-Fi check box.
7. Click the Apply button.
8. Click the Configure button.
The Facebook Login screen displays.
9. Log in to your Facebook business account.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)