NETGEAR R6300v2 User Manual

ReadySHARE Printer
63
R6300v2 Smart WiFi Router
ReadySHARE Printer Utility
The ReadySHARE printer utility allows you to control from your computer a shared USB
printer that is connected to the USB port on your router. You can share this USB printer
among the Windows and Mac computers on your network.
You have to install this utility before you can use the ReadySHARE Printer feature.
• For this feature to work, this utility has to be installed and running in the background on
each computer from which you want to control this USB printer
.
• The driver software for the USB printer has to be installed on each computer from which
you want to control this USB printer
.
• The ReadySHARE Printer utility has both a Mac version and a Windows version.
• The ReadySHARE Printer utility setup file and instructions are available through this
URL: www.netgear.com/readyshare
Once installed, the ReadySHARE Printer utility displays on your computer as the NETGEAR
USB Control Center
.
Set Up the ReadySHARE Printer Utility
You have to connect the USB Printer to your router and install the utility on each computer in
your network from which you want to control the USB printer.
 To set up ReadySHARE Printer:
1. Use a USB cable to connect the printer to the USB port on the side of the router
.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)