NETGEAR R6300v2 User Manual

ReadySHARE Printer
68
R6300v2 Smart WiFi Router
2. Select Tools > Configuration.
3. Specify the following settings:
• Automatically execute when logging on W
indows. Enable this utility to start
automatically when you are logged in to Windows.
• T
imeout. Specify the time-out value for holding the USB resource when it is not in
use.
• Language. Select the display language for this utility
.
4. Click OK.
Your changes are saved.
Manage USB Print and Scan Jobs
The NETGEAR USB Control Center utility runs in the background on each computer in your
network. This utility manages the printing queue and handling for the USB printer connected
to your router.
After you activate the utility on each computer in the network, the status of the USB printer is
A
vailable on all of the computers.
• When the status is Available, you can use the USB printer from any computer in the
network. The utility on each computer automatically manages the printing queue and
handling. The status of the USB printer appears as Available on all of the computers
when no print jobs are in process.
• When the status is Manually connected by xxx, only the xxx computer can use the printer
.
Other network devices must wait until the xxx computer has released the connection, or
until the connection times out (the default time-out value is 30 seconds).
You can click the Disconnect button at any time to release the connection.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)