NETGEAR R6300v2 User Manual

NETGEAR genie Basic Settings
22
R6300v2 Smart WiFi Router
your account is first opened. They accept traffic only from the MAC address of that computer.
This feature allows your router to use your computer’s MAC address (also called cloning).
• Use Default Address. Use the default MAC address.
• Use Computer MAC
Address. The router captures and uses the MAC address of the
computer that you are now using. You have to use the one computer that the ISP allows.
• Use This MAC
Address. Enter the MAC address that you want to use.
Parental Controls
The first time you select Parental Controls from the BASIC Home screen, your browser goes
to the Live Parental Controls website. You can learn more about Live Parental Controls or
download the application.
 To set up Live Parental Controls:
1. Select Parental Controls on the dashboard screen.
2. Click either the W
indows Users or Mac Users button.
3. Follow the onscreen instructions to download and install the NETGEAR Live Parental
Controls Management utility
.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)