NETGEAR R6300v2 Installation Guide

11
 On Mac systems, do this:
1. Select Go > Connect to Server.
2. Enter smb://readyshare as the server address.
3. Click Connect.
ReadySHARE Printer
 To use ReadySHARE Printer:
1. Connect the USB printer to the router USB port with a USB
printer cable.
2. Install the printer driver software (available from the printer
manufacturer) onto each computer that will share the printer.
3. Visit www.netgear .com/readyshare and download and install the
NETGEAR USB Control Center utility onto each computer that will
share the printer.
4. For ReadySHARE Printer setup, follow the Easy to Set-up
Instructions that are available online just above the download links.

NETGEAR R6300v2 Specifications

General

WiFi Technology	802.11ac Dual Band Gigabit
WiFi Range	Medium to large homes
USB Ports	1 x USB 3.0, 1 x USB 2.0
Wireless Standard	802.11a/b/g/n/ac
Frequency Band	2.4 GHz and 5 GHz
Processor	800 MHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	3 external antennas
Security	WPA/WPA2-PSK
Ports	1x WAN, 4x LAN, 1x USB 3.0, 1x USB 2.0
Memory	256 MB RAM, 128 MB Flash
WiFi Speed	Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)