NETGEAR R6700AX User Manual

To erase the settings:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Erase button.
The configuration is reset to factory default settings. When the reset is complete,
the router restarts. This process takes about two minutes.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset.
For example, do not close the browser, click a link, or load a new page. Do not turn
off the router. Wait until the router finishes restarting.
Restore the settings
To restore configuration settings that you backed up:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5.
Click the Browse button to find and select the .cfg file.
6. Click the Restore button.
User Manual102Manage Your Router
4-Stream AX1800 WiFi 6 Router

NETGEAR R6700AX Specifications

General

WiFi Speed	AX1800
Bands	Dual-Band
USB Ports	1 x USB 3.0
Beamforming	Yes
MU-MIMO	Yes
Antennas	3 external antennas
WiFi Technology	Wi-Fi 6 (802.11ax)
Processor	Triple-Core 1.5GHz
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Security	WPA2/WPA3-Personal
Memory	256MB RAM, 128MB Flash