NETGEAR R8000 Installation

13
¾ To access the USB drive from a Mac:
1. Insert your USB storage drive into a blue USB 3.0 port on the
router.
2. If your USB drive has a power supply, you must use it when you
connect the USB drive to the router.
When you connect the USB drive to the router USB port, it
might take up to two minutes before it is ready for sharing. By
default, the USB drive is available to all computers on your local
area network (LAN).
3. Select Go > Connect to Server.
4. Enter smb://readyshare as the server address.
5. Click the Connect button.

NETGEAR R8000 Specifications

General

Model	R8000
WiFi Technology	802.11ac
WiFi Band	Tri-Band
Antenna	6 external antennas
RAM	256 MB
Flash Memory	128 MB
WiFi Speed	Up to 3200 Mbps
Processor	1GHz dual-core
Ethernet Ports	5 (1 WAN & 4 LAN) Gigabit Ethernet ports
USB Ports	1 x USB 3.0 + 1 x USB 2.0
Security	WEP, WPA, WPA2