NETGEAR R8000 Installation

18
Personal FTP Server
With your customized free URL, you can use FTP to access your
network when you aren’t home through Dynamic DNS. To set up
your FTP server, follow these high-level steps:
1. Register for a free NETGEAR Dynamic DNS (DDNS) service
account.
2. Provide the account settings to your router.
3. Connect a USB hard disk to your router and set up FTP access
through the Internet.
These steps are explained in detail in the user manual, which is
available online at http://downloadcenter.netgear.com or through a
link in the router’s user interface.

NETGEAR R8000 Specifications

General

Model	R8000
WiFi Technology	802.11ac
WiFi Band	Tri-Band
Antenna	6 external antennas
RAM	256 MB
Flash Memory	128 MB
WiFi Speed	Up to 3200 Mbps
Processor	1GHz dual-core
Ethernet Ports	5 (1 WAN & 4 LAN) Gigabit Ethernet ports
USB Ports	1 x USB 3.0 + 1 x USB 2.0
Security	WEP, WPA, WPA2