NETGEAR R8000 User Manual

2
WiFi Network Name and Password
The preassigned WiFi network name (SSID) and password (network
key) are unique to your router, like a serial number. Because the router
automatically uses WiFi security, you don’t need to set it up. The WiFi
settings are on the label on the router.
We recommend that you use the preassigned WiFi settings because you
can check the label if you forget them. You can also log in to the router to
change these settings. If you do so, write down the new WiFi settings and
store them in a safe place.
You can write the WiFi settings from the label on your router in this space
for easy reference. If you change the WiFi settings, write the new settings
here for easy reference and store this booklet in a safe place.
WiFi network name (SSID):
Network key (password):

NETGEAR R8000 Specifications

General

Model	R8000
WiFi Technology	802.11ac
WiFi Band	Tri-Band
Antenna	6 external antennas
RAM	256 MB
Flash Memory	128 MB
WiFi Speed	Up to 3200 Mbps
Processor	1GHz dual-core
Ethernet Ports	5 (1 WAN & 4 LAN) Gigabit Ethernet ports
USB Ports	1 x USB 3.0 + 1 x USB 2.0
Security	WEP, WPA, WPA2