17
Print Wirelessly With ReadySHARE Printer
ReadySHARE Printer lets you connect a USB printer to a USB port on the
router and print wirelessly.
¾ To set up ReadySHARE Printer:
1. Connect the USB printer to a USB port on the router with a USB
printer cable.
2. On each computer that will share the printer, do the following:
a. Install the current USB printer driver software (available from the
printer manufacturer).
b. Download the NETGEAR USB Control Center utility from
netgear.com/readyshare and install it.
c. Select the language.
3. If prompted, select the printer and click the Connect button for each
computer.
When the first computer connects, the status changes to Manually
connected by xxx.
For each computer, when you complete Step 3, the printer status
displays as Available.
To Next Page
Loading...
