NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual
6-6 Using Network Monitoring Tools
v1.0, March 2008
Viewing a List of Attached Devices
The Attached Devices screen contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under Maintenance, select Attached
Devices to view the table.
For each device, the table shows the IP address, NetBIOS host name or device name (if available),
and the Ethernet MAC address. To force the router to look for attached devices, click Refresh.
Managing the Configuration File
The configuration settings of the WNR3500 router are stored within the router in a configuration
file. You can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
Figure 6-4
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.
To Next Page
Loading...
