NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual
Troubleshooting 7-11
v1.0, March 2008
1. Select Wireless Settings under Setup in the main menu of the WNR3500 router.
2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive
name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters.
The default SSID is NETGEAR.
3. Select the region in which the wireless interface will operate.
4. Set the channel. The default channel is Auto.
Figure 7-1
Note: The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the
SSID of any wireless access adapters must match the SSID you specify in the
WNR3500 router. If they do not match, you will not get a wireless connection
to the WNR3500 router.
To Next Page
Loading...
