NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual
Safeguarding Your Network 2-7
v1.0, March 2008
The available settings in this screen are:
• Name (SSID). The SSID is also known as the wireless network name. Enter a value of up to
32 alphanumeric characters. When more than one wireless network is active, different wireless
network names provide a way to separate the traffic. For a wireless device to participate in a
particular wireless network, it must be configured with the SSID for that network. The
WNR3500 default SSID is NETGEAR. You can disable this broadcast as described in
“Viewing Advanced Wireless Settings” on page 2-12.
• Region. This field identifies the region where the WNR3500 router can be used. It might not
be legal to operate the wireless features of the wireless router in a region other than one of
those identified in this field.
Figure 2-2
Note: The region selection feature might not be available in all countries.
To Next Page
Loading...
