26 | Chapter 2: Diagnostics and Maintenance
ReadyNAS 4200 Hardware Manual
Failed Disk Notification
When a disk fails in your ReadyNAS, you are notified of the failure by e-mail. The FrontView
Health screen provides information about the failed disk. The disk tray of the ReadyNAS
4200 includes a failed disk LED that turns amber when its disk fails.
Choosing a Replacement Disk
On the FrontView main menu, select Status > Health. Take note of the disk vendor and model
used in your ReadyNAS. It is best to replace a failed disk with the same disk model. Contact
the disk vendor, and arrange to have the disk replaced if the disk is still under warranty. A disk
RMA from the vendor requires that you provide the serial number of the disk. To locate the
serial number, open the disk tray and take out the failed disk.
To Next Page
Loading...
