10 Using the FrontView Setup Wizard
If you assign static IP addresses, be aware that the browser will lose connection to the
ReadyNAS device after the IP address has been changed. If you encounter this problem, click
Rescan in RAIDar to rediscover the device and reconnect from there.
2. If your ReadyNAS has more than one Ethernet interface, click Next to display the second
Ethernet configuration page. Otherwise, click Next to access the Global Settings screen.
Global Settings
The Global Settings screen allows you to specify the ReadyNAS host name, default gateway and
DNS servers.
To set the Global Settings:
1. Enter a hostname that you wish to advertise the ReadyNAS on your network. This hostname
can be used in place of the IP address when accessing the ReadyNAS from Windows, or over
OS X using SMB. This is also the name that will appear in the RAIDar scan list.
2. If you selected the DHCP option in the Ethernet tab, the gateway and domain name server
fields will automatically be filled based on the settings from your DHCP server. If you selected
the Static option, manually enter the information in the field provided
Figure 11
To Next Page
Loading...
