12 Using the FrontView Setup Wizard
2. Specify a password recovery question and the expected answer, along with your email address
in the remaining fields. This information will allow you to reset the password on the
ReadyNAS in case the password is lost. See the ReadyNAS User Guide for details on this
process, if required.
3. Click Apply. Click Next to display the Security Mode screen.
Security Mode
You must decide on a security mode that is appropriate for your environment. The default Share
mode is appropriate for smaller environments where everyone on the network will be using this
device as a big repository for shared data. Shares in this mode can be protected with a password.
To select the Security Mode:
1. Accept the default workgroup or specify one of up to 15 characters in length. Additional
security options are covered in the ReadyNAS User Guide.
Figure 13
To Next Page
Loading...
