Using the FrontView Setup Wizard 19
Click Next to continue with the Advanced Control mode. The Advance Control options are
documented in the ReadyNAS User Guide (a link to the ReadyNAS User Guide is on your
Installation CD).
You can now start accessing the shares that you just created using Windows Explorer. For
instructions on how to access the shares from other client systems, see “Accessing Shares” in the
ReadyNAS User Guide.
If you choose not to register at this time, you can always go to http://www.netgear.com/register,
select your ReadyNAS product and register on-line. Then, enter your registration information on
the form provided.
Figure 22
To Next Page
Loading...
