Workaround: For gateways that send certificates larger than 1024
bits to the client, upgrade to the 128-bit version of Internet
Explorer, which include the Microsoft Enhanced CSP.
• Automatic certificate selection may not work in Aggressive
Mode.
Description: Because Aggressive Mode sends an ID payload in the
first initiator packet, and no explicit certificate is selected, the
session may fail. The client make a best guess, and selects the first
certificate that meets the specified ID type, such as DN, email, or
IP address. This certificate, however, may not be a valid
certificate.
Workaround: Manually select the certificate when using
Aggressive Mode, or limit your certificates to one in the
Certificate Manager.
• Compatibility issues with EarthLink software
Description: The client is incompatibility with EarthLink Internet
software, version 5.02.
Workaround: EarthLink can still be accessed through a standard
dial-up networking configuration. Uninstall the EarthLink software.
EarthLink Technical Support is aware of the situation; contact
EarthLink for help in setting up a standard dial-up configuration for
EarthLink access.
• Compatibility issues with Sony Vaio and 3COM 3CCFE575CT
CardBus PC Card
Description: The 3COM 3CXFE575CT 10/100 LAN CardBus PC
Card isn’t compatible with Sony Vaio notebook computers; after
the client is installed, the computer requires an Ethernet cable to
be attached to boot. This NIC card works fine in other computers..
Workaround: Use hardware profiles to disable the NIC card, or
remove the NIC card when the computer isn’t attached to the
network.
• On Windows 95/98/Me, the Entrega USB has problems with
suspend/standby.
Description: The Entrega USB has problems when returning from
suspend mode in that the interface is not always present.
Workaround: Unplug the adapter, and then plug it back in.
To Next Page
Loading...
Need help?
General
