In Version 1.1.1 (Build 14)
Issue # Priority Synopsis
4858 H
Double and Triple XAUTH prompt occurs on connections that
failover to a RGW.
4892 H
Enternet PPPoE client doesn't work with client when using the
virtual adaptor, non VA connections work as expected.
5183 H
Unable to release and renew IP addresses or renewals of DHCP
leases fail with the firewall build.
5221 H
VPN.exe causes fatal application error when running vpn.bat
from a command prompt.
5367 H Auto-retrieval of MSCEP certificate does not work
5419 H
SPDedit Gateway IP address box remains enabled after un-
checking Connect Using box
5454 H
SpdEdit incorrectly chooses 1st cert with same label,
regardless of container ID
5458 H IPSecMon crashes when retrieving policy or certificate
5435 I
VA settings are not retained when moving within various
screens in the policy editor without saving first.
5437 I Secure All and Secure Other Connections display the manual
connect option when first selected or clicking the Secure radio
button.
5438 I Ghost Save and RGW buttons after importing an unlocked
policy over a locked policy; unable to save any changes or add
RGW.
5443 I SPDedit Other Connections ID type set to Any Gateway IP
Address remains enabled after clearing the Connect Using
check box
5457 I
Client loads wrong spi when AH and ESP proposed in the same
policy
To Next Page
Loading...
Need help?
General
